The manufacturer of Sensor urinal flushometer said that many people do not know much about the size of the urinal downpipe from the wall. In fact, the urinal downpipe is about 15 cm from the wall and 32.5 cm.
1. If the urinal does not have a water trap, it is necessary to install a water trap in the sewage pipe. The manufacturer of Sensor urinal flushometer tells you that the urinal sensor is based on the principle of infrared induction, and sends a signal to the pulse solenoid valve after sensing by the human body to automatically control the flushing. The urinal sensor performs automatic flushing only within the sensing range.
2. Above the interface of the urinal and the drain pipe, make a slanted hole of about 8mm through the ceramic tile and the water pipe. Sensor urinal flushometer manufacturers tell you that the height of the ceramic urinal is about 950mm from the ground, and then determine the appropriate size of the urinal sensor according to the ceramic and internal pipeline conditions, but you should pay attention to flush the sediment and impurities in the pipeline with a certain water pressure to prevent Impurities enter the inside of the solenoid valve.
3. The distance from the drain outlet of the urinal installed on the floor to the wall is generally 150mm, but different models may be different. Sensor urinal flushometer manufacturers tell you that a urinal sensor refers to a sensor flush valve used for flushing water, and is used with a urinal. The urinal is generally divided into two types, one is a squat urinal, and the other is a urinal. Seated urinal.