Common failures of Sensor urinal flushometer products
The Sensor urinal flushometer is convenient for maintenance and installation of the induction device, and has a simple and compact structure. At the same time, the outlet pipe joint at the lower end of the induction pedal flush valve can be refitted as a faucet nozzle and can be used as a faucet. The Sensor urinal flushometer is multi-purpose and can be used in various occasions. use.
Common failures of Sensor urinal flushometer products:
1. There is induction (the indicator light is on) and no water is produced: The manufacturer of the Sensor urinal flushometer tells you to check whether the filter is blocked. If there is, clean it, then disassemble the inside of the solenoid valve for cleaning, and then put it back as it is. After sensing by hand, if the solenoid valve If the spool has no sound of working (opening and opening and closing), replace the solenoid valve coil
2. There is no induction (the indicator light is not on) and the water is always flowing: the manufacturer of the Sensor urinal flushometer tells you to check whether the power supply is normal. If the power supply is normal, the indicator light does not light up after sensing by hand, then replace the induction circuit board.
3. There is induction (the indicator light is on) and the water is always flowing: First, check whether the water inlet filter is blocked by impurities. If not, after sensing it by hand, carefully listen to whether the solenoid valve spool is working (there is a sound of opening and closing), Sensor urinal The flushometer manufacturer tells you that if it works, disassemble the inside of the solenoid valve to clean it, and then put it back as it is.
4. There is an induction (the indicator light is on) for the amount of water: clean the filter screen and solenoid valve, and then put it back as it is.
The above are the common faults of Sensor urinal flushometer, I hope to help you.
Sensor toilet flusher manufacturers take you to understand how to repair urinal leaks
Sensor toilet flusher is relatively common. When there is a little boy at home, a Sensor toilet flusher can be prepared for him. This kind of toilet flusher requires power and is very convenient. So, how to repair a leaky urinal? Let's take a look at it below.
Introduction to the main features of Urinal induction water flush
Only within the sensing range, Urinal induction water flush will perform automatic flushing, otherwise it will not flush. The flushing program, flushing time and sensing distance can be adjusted. It is a relatively advanced intelligent water-saving product in China.